YuzukiHD/YuzukiChameleon
Fork: 59 Star: 217 (更新于 2024-11-28 11:31:21)
license: NOASSERTION
[OSHW] Yuzuki Chameleon is a Raspberry Pi A Shaped SBC based on Allwinner H616
最后发布版本: 0.0.2 ( 2023-07-14 12:35:58)
Yuzuki Chameleon
Yuzuki Chameleon is a Raspberry Pi A Shaped SBC based on Allwinner H616
License: CERN Open Hardware Licence Version 2 - Strongly Reciprocal
Hackaday.io: https://hackaday.io/project/187166-yuzuki-chameleon
Purchase link: https://www.aliexpress.us/item/3256804825945922.html
Docker: docker pull gloomyghost/yuzukichameleon
Feature
- Based on Allwinner H616 chip, 4*Cortex A53
- HDMI supports 4K@60, supports up to 6K video decoding
- Up to 2GB RAM and 128GB eMMC storage
- Onboard eMMC and TF card slot
- Onboard XR829 WIFI+Bluetooth chip
- 4 USB Type C, 3 HOST and one OTG, support USB camera and capture card input
- Onboard fan slot, radiator fixing hole
- Lead out RJ45 100M interface
- Onboard 40 Pin GPIO, can expand SPI LCD display, Gigabit Ethernet, microphone array, CAN transceiver, temperature and humidity sensor, acceleration sensor and so on.
- AXP313A Power Solution
- Raspberry Pi A Size
Allwinner H616
H616 is a new-generation high picture quality 64-bit 4K@60fps decoding SoC provided by Allwinner for the OTT and IPTV markets. It integrates the quad core 64-bit CortexTM-A53 processor, and the new G31 GPU engine of ARM that supports OpenGL ES 3.2/Vulkan 1.1. Besides, H616 supports full-format 4K@60fps 10-bit ultra-HD video decoding, Allwinner self-developed SmartColor3.3TM picture enhancement engine, Dolby, and DTS audio processing. H616 adopts the new generation of power consumption technology, and reduces power consumption of 20% than the last generation.
Firmware
You can find latest firmware at RELEASE We provide Tina Linux, Ubuntu, Android TV firmwares
Development
BSP: Docker image
root@root:~# docker pull gloomyghost/yuzukichameleon
root@root:~# docker run -it gloomyghost/yuzukichameleon
root@29a6b322d542:~# cd ~/
root@29a6b322d542:~# source build/envsetup.sh
root@29a6b322d542:~# lunch 1
root@29a6b322d542:~# mp -j12
Mainline
https://github.com/dumtux/Allwinner-H616
Flash Firmware
Allwinner Proprietary image (Android, Tina Linux, BSP Debian)
The following mainly introduces the method of flash with PhoenixSuit. The flash method of LiveSuit and PhoenixUSBPro is similar.
Download PhoenixSuit:PhoenixSuit
Before using PhoenixSuit, you need to install the driver at the same time: Allwinner USB Driver
Enterprise developers will also install the Allwinner USB driver when installing APST, so there is no need to install it separately
Specific steps are as follows:
- Open PhoenixSuit, when the device is powered on and connected to the PC, PhoenixSuit will prompt to recognize the device;
- Click
One-click flash-browse
to select the firmware to be flashed; - Click
Upgrade now
, then a restart command will be sent to the device through USB, the device will restart with the programming logo, and enter the flash mode in the restart stage; - When the device returns to boot, it will be automatically programmed, and you can see that the progress bar of PhoenixSuit is moving;
- After the flash is successful, the device restarts.
If the software cannot automatically connect to the development board, please follow the steps below to force to the download mode:
- Power on the development board, press and hold the FEL button on the board
- Click the RST button
- After the PC is connected to the development board, release the FEL button
- Just wait for the download
Mainline Linux (Armbian, Ubuntu, Mainline Buildroot, and so on..)
https://github.com/dumtux/Allwinner-H616
Firmware based on the mainline can be directly accessed by using the dd
command
YuzukiHD/YuzukiChameleon同语言 最近更新仓库
2024-12-23 10:44:26 BlackTeaPie/Course-of-Temptation-Chinese-Localization
2024-12-23 06:38:40 Loyalsoldier/clash-rules
2024-12-20 06:37:09 Qubic-Solutions/rqiner-builds
2024-12-15 19:50:40 JeoJay127/RapidEFI-Tool
2024-12-13 18:13:17 Xposed-Modules-Repo/fansirsqi.xposed.sesame
2024-12-11 23:05:00 Dr-TSNG/ZygiskNext