jgphilpott/metaCube
Fork: 0 Star: 2 (更新于 2024-12-10 07:40:04)
license: MIT
Language: G-code .
A 3D printable cube with a recursive geometric pattern.
最后发布版本: v2 ( 2020-07-13 03:49:49)
Intro
The metaCube is a 3D printable cube with a recursive geometric pattern. It was designed using Polymaker, the STL files can be downloaded from this repository or from Thingiverse. This repository also contains the G-code files that were used in the initial print, they were sliced using Cura and printed on an Ender 5 Pro.
A video introduction is available here.
Print Settings
Printer Brand
Printer
Resolution
- 0.1mm
Infill
- 40%
Filament Material
Nozzle Temp
- 250°
Bed Temp
- 70°
主题(topics):
3d-models, 3d-printing, geometry
jgphilpott/metaCube同语言 G-code最近更新仓库
1970-01-01 00:00:00 synthetos/TinyG
1970-01-01 00:00:00 notmahi/dobb-e
1970-01-01 00:00:00 seemecnc/RostockMAXv2
1970-01-01 00:00:00 B20bob/Orcaslicer_Sovol_SV04_DUAL_Profiles
1970-01-01 00:00:00 BrendonBuilds/mod0
1970-01-01 00:00:00 PlummersSoftwareLLC/NightDriverStrip