Supports booting ALL current CFWs, Android/Linux booting and payload tools. No more SD card removals

Supports: Erista (T210) and Mariko (T210B01) units

Latest HOS supported: 16.0.0

hekate v6.0.2 changes

• HOS 16.0.0 Support
• Fixed an issue which could, in some cases, cause Stock-mode to hang on boot on HOS 1.0.0 to 6.1.0.
• Fixed an issue on TUI mode where user could not access options without a hekate_ipl.ini In case hekate started with removed or broken SD and was plugged later
• L4T Loader: updated T210B01 SC7-Exit firmware to account for new burnt fuses count
• Various other improvements.

emuMMC Changes

• HOS 16.0.0 Support As always based on https://github.com/m4xw/emuMMC

Nyx v1.5.2 Changes

• HOS 16.0.0 Support
• Improve SD error handling on init. Added retries in case of failure. If it still fails to load them, now user will properly get a fatal error message.
• Added support for bpmpclock=3 which further reduces clock speed for the worst binned SoCs Additionally, the first boot clock test now lasts fro 10s on first boot, instead of 5s. To change bpmpclock, you need to manually edit nyx.ini, since it's not in the GUI options.
• Reboot to OFW button now gets disabled if AutoRCM is enabled
• Fixed an issue on PKG1/2 dump tool which would produce incorrect binaries on PKG1 dumping.
• Various improvements/fixes

BDK Changes

• SDMMC: Improve init error handling
• GPIO: Added gpio_direction_input and gpio_direction_output functions that can fully configure a pin easier.
• 5V Regulator: Removed X3 pin for T210B01. VBUS regulator should not be managed there.
• HW Deinit: Do not touch APE clocks on T210B01
• HW Deinit: Remove support for broken HW init
• CLOCK: Improve PLLC deinit
• BM92T36: Added sanity checks for comms. Fixes hanging in case of broken i2c to that chip.
• SDRAM: Removed support for (LP)DDR2/3. Only LPDDR4(X) is used anyway.

FAQ

Notes

Check readme.md for more.

NOTE: For maximum performance of UMS in Windows, you need to run nyx_usb_max_rate__run_only_once_per_windows_pc.reg, only once per PC you have. It only affects hekate's usb device. You can also view that file with text editor and see what it does. Linux/Mac OS users do not need that.

How to update:

• Drag n drop bootloader folder into sd card root and hit merge/replace. No need to delete that folder first, especially if you want your configs and payloads.
• You can choose to update your RCM injection device or PC with the new hekate_ctcaer_x.x.x.bin or not. In any case, bootloader/update.bin, will be checked and if newer it will get loaded. update.bin is hekate and it is already copied with the bootloader folder drag n drop update process.

Notice about Atmosphere 1.0.0 and up: The fss0=atmosphere/fusee-secondary.bin in hekate_ipl.ini must be changed to fss0=atmosphere/package3. And make sure that atmosphere/contents folder does not have old Atmosphere components. Notice about resized emuMMC: Resized emuMMC does not have the slow bug anymore. You can create a new one or recreate it via Nyx and the issue will be gone.

Download: