v12.1.0

版本发布时间: 2022-08-19 16:46:20

arendst/Tasmota最新发布版本:v14.2.0(2024-08-14 20:52:35)

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version 2.0.4.1.

Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.4.1 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-12.1.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.4.1.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32xy.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash.
tasmota32xycdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash.
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota32/release-12.1.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v12.1.0 Patricia

Added

Command SetOption45 1..250 to change default bistable latching relay pulse length of 40 milliseconds
Command SetOption144 1 includes a timestamp in zigbee ZbReceived messages
Command GlobalTemp2 1..250 to select Global Temperature source indexed from teleperiod occurance data #15834
Command GlobalHum2 1..250 to select Global Humidity source indexed from teleperiod occurance data #15834
Command GlobalPress2 1..250 to select Global Pressure source indexed from teleperiod occurance data #15834
Command Sleep2 ! to cancel pending one-shot speed setting #15954
Commands WifiScan and WifiTest #16141
Support for 5-channel light dimmer driver SM2335 used in SwitchBot Color Bulbs #15839
Support for Sonoff POWR3xxD and THR3xxD #15856
Support for bistable (latching) relays mixed with monostable relays using GPIO Relay_b or Relay_bi as used by Sonoff POWR320D and THR320D
Support for Modbus bridge adding commands ModbusSend, ModbusBaudrate and ModbusSerialConfig #16013
Support for multiple IRsend GPIOs #16138
Support for Catalan language translations by Albert Gonzalez #16145
Zigbee added recording of when the battery was last reported #16146
Zigbee add Battery auto-probe (can be disabled with SetOption143 1) #16148
ESP32 Support for Ultra Low Power (ULP) coprocessor via Berry by Christian Staars #15916

Breaking Changed

Changed

TasmotaModbus library from v3.4.0 to v3.5.0 #16245
ESP32 Arduino core from v2.0.3 to v2.0.4.1 #15940
ESP32 LVGL library from v8.2.0 to v8.3.0 #16019
Driver DHT v6 consolidation for both ESP8266 and ESP32 to support SI7021, THS01 and MS01 on ESP32 #15856