v2.7.0-rc1
版本发布时间: 2022-03-25 21:55:10
EdgeTX/edgetx最新发布版本:nightly(2024-12-21 10:48:05)
We are pleased to offer EdgeTX "Black Pearl" v2.7.0-RC1. As this is a release candidate, there may still be some minor issues that still need work on before release. We need your help in testing these builds to ensure there are no major bugs or faults that will cause problems during flight. Please ensure you fully bench-test your models after updating, and report any issues you encounter.
Highlights of this release include:
- Model templates for color radio - preview of it in action during development
- Model level ADC Jitter option - this lets you turn it off for multirotors/flight controllers, and on for models without flight controllers (see here)
- Support for ImmersionRC Ghost 12 bit mode
- Lemon-RX DSMP transmitter module support - Official RC Groups thread
- Serial driver rewrite - allowing for internal GPS support to be enabled without a custom build, and also Bluetooth in the near future. You can now choose what each port does on radios with one or more serial port.
- Option for custom throttle position for throttle warning - i.e. for center-sprung throttle
- Show channel change direction in the output screen and output edit screens
- Show mixer bars on edit screens for mixes and outputs
- Jumper TPro - Add serial passthrough in order to update internal ELRS module (hardware mod required, see #1573)
- Jumper TPro - Use function switch LEDs as a charge level indicator when charging
- Support for opening log files in text viewer on color screen radios, with better support for very large text files
- Sticky logical switches will remain "OFF" until set
- RadioMaster Zorro can now use serial Nano modules (i.e. XJT Lite)
- Calculated vertical speed sensor for NV14 using CAT01 sensor
- Numerous bug fixes and minor enhancements, especially for several known issues with Companion after introduction of YAML support
Full Changelog: https://github.com/EdgeTX/edgetx/compare/v2.6.0...v2.7.0-rc1
Message from the development team
Just like everyone else, we have been affected by illness, work and personal issues, and thus have not been able to deliver all the features we had planned to release for 2.7. However, rather than delay the release, we have instead decided to deliver what we do have ready to ship. Having said that, there are some extensive re-writes in progress which were postponed into 2.8, (as they were not mature enough to be released in 2.7). These underlying code re-writes will allow us to begin work on a more usable, modern user interface, so expect to see some changes to the radio interface, both big and small, in the coming versions.
UI/UX behavioral changes and/or new capabilities:
- colorlcd: Radios with dedicated SYS and MDL keys will now go into the Radio Setup and Model Setup menus on short press. A long press of the MDL key will go the to model select screen.
Complete list of changes
Please refer to the milestone for this release, and for the full changelog https://github.com/EdgeTX/edgetx/compare/v2.6.0...v2.7.0-rc1
Known Limitations and Issues
- Wireless Model Trainer and CRSF/ELRS - if using the Multi Protocol Module (MPM) as a wireless trainer in conjunction with CRSF/ELRS, do not go above 250 Hz, otherwise the MPM wireless trainer will be dropped. 250 Hz or below is stable.
Supported radios
Black & white LCD screen
- RadioMaster T8 / T8 Pro
- RadioMaster TX12
- RadioMaster Zorro
- Jumper T12 / T12 Plus / T12 Pro Hall
- Jumper T-Lite
- Jumper T-Pro
- FrSky QX7 / QX7S / QX7 ACCESS / QX7 ACCESS
- FrSky X9 Lite / X9 Lite S
- FrSky X-Lite / X-Lite S / X-Lite Pro
- FrSky X9D / X9D+ / X9D+ SE
- FrSky X9D+ 2019 / X9D+ SE 2019
- Frsky X9E / Frsky X9E Hall
Color LCD screen
- RadioMaster/Eachine TX16S / RadioMaster TX16S MAX
- Jumper T16 / T16 Plus / T16 Pro Hall
- Jumper T18 / T18 Lite / T18 Pro
- FrSky X10 / X10S / X10 Express / X10S Express
- FrSky X12S / X12S-IRSM
- FlySky NV14
Installation Guide
https://github.com/EdgeTX/edgetx.github.io/wiki/EdgeTX-Installation-Guide
Flash firmware via Chrome based browser
https://buddy.edgetx.org/#/flash?version=v2.7.0-rc1
Unofficial builds
building...
New Contributors
- @samueloph made their first contribution in https://github.com/EdgeTX/edgetx/pull/1502
- @klutvott123 made their first contribution in https://github.com/EdgeTX/edgetx/pull/1604
- @TheIsotopes made their first contribution in https://github.com/EdgeTX/edgetx/pull/1651
- @hexfet made their first contribution in https://github.com/EdgeTX/edgetx/pull/1595
- @Batambatam made their first contribution in https://github.com/EdgeTX/edgetx/pull/1682
- @mha1 made their first contribution in https://github.com/EdgeTX/edgetx/pull/1617
- @kobatan made their first contribution in https://github.com/EdgeTX/edgetx/pull/1678
- @stronnag made their first contribution in https://github.com/EdgeTX/edgetx/pull/1712
- @3djc made their first contribution in https://github.com/EdgeTX/edgetx/pull/1581
- @yds made their first contribution in https://github.com/EdgeTX/edgetx/pull/1721
1、 edgetx-cpn-linux-v2.7.0-rc1.zip 71.43MB
2、 edgetx-cpn-osx-v2.7.0-rc1.zip 41.99MB
3、 edgetx-cpn-win-32-v2.7.0-rc1.zip 23.89MB
4、 edgetx-cpn-win-v2.7.0-rc1.zip 22.84MB
5、 edgetx-firmware-v2.7.0-rc1.zip 10.99MB