v11.0.0
版本发布时间: 2022-02-12 22:26:16
arendst/Tasmota最新发布版本:v14.2.0(2024-08-14 20:52:35)
RELEASE NOTES
Migration Information
This version removes support for direct migration from versions before v8.1.0 (Doris)
See migration path for instructions how to migrate to a major version.
Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.
Pay attention to the following version breaks due to dynamic settings updates:
- Migrate to Sonoff-Tasmota 3.9.x
- Migrate to Sonoff-Tasmota 4.x
- Migrate to Sonoff-Tasmota 5.14
- Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
- Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)
--- Major change in parameter storage layout ---
- Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)
--- Major change in internal GPIO function representation ---
- Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)
- Upgrade to latest release (http://ota.tasmota.com/tasmota/release/)
While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.
Supported Core versions
This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
This release will be supported from ESP32/Arduino library Core version 2.0.2.1.
Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.2 have been removed.
Support of TLS
In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation
Initial configuration tools
For initial configuration this release supports Webserver based WifiManager or Serial based command interface.
Initial installation
Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.
Provided Binary Downloads
ESP8266 or ESP8285 based
The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.
- tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
- tasmota-AF.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
- tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
- tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
- tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
- tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
- tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
- tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
- tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.
Above binaries are also available as gzipped version allowing faster uploads.
Latest released binaries can be downloaded from
- https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
- http://ota.tasmota.com/tasmota/release
Historical binaries can be downloaded from
The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz
ESP32 based
The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.2.1.
- tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
- tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 and 4M+ flash.
- tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
- tasmota32-AF.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
- tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
- tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
- tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
- tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
- tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
Latest released binaries can be downloaded from
- https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
- http://ota.tasmota.com/tasmota32/release
Historical binaries can be downloaded from
The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin
Additional information
List of embedded modules.
Complete list of available feature and sensors.
Changelog v11.0.0 Olivia
Added
- Command
Json {<Tasmota commands>}
to enable input of any command as JSON tokens #14568 - Command
SetOption44 1..100
to set base tolerance percentage for matching incoming IR messages (default 25, max 100) #14555 - Command
SetOption134 1
to disable PWM auto-phasing for lights by default (new behavior) #14590 - Command
SSerialConfig <serialconfig>
to change Serial Bridge configuration - Command
SspmDisplay 1
to display Sonoff SPM energy data in GUI for relays powered on only - Command
SspmEnergyTotal<relay>
to (p)reset Sonoff SPM total energy without today's energy - Command
SspmEnergyYesterday<relay>
to (p)reset Sonoff SPM energy yesterday - Command
SspmHistory<relay>
to retrieve Sonoff SPM daily energy up to last six month (as defined by ARM firmware) - Command
SspmIAmHere<relay>
to (faintly) blink Sonoff SPM-4Relay module error light of requested relay - Command
SspmLog<relay> [x]
to retrieve Sonoff SPM relay power state change and cause logging - Command
SspmMap 2,1,..
to map Sonoff SPM scanned module to physical module #14281 - Command
SspmOverload<relay> <options>
to set Sonoff SPM overload criteria for any relay - Command
SspmScan
to rescan Sonoff SPM modbus - Command
WebTime <start_pos>,<end_pos>
to show part of date and/or time in web gui based on "2017-03-07T11:08:02-07:00" - Commands for ESP32 ethernet configuration
EthIpAddress
,EthGateway
,EthSubnetmask
,EthDnsServer1
andEthDnsServer2
#14385 - Support for Eastron SDM230 modBus energy meter #13443
- PWM Dimmer two button support #13993
- Support for Linkind dimmer as GPIO
Option A6
#14004 - DDP schemes for light and WS2812 #14017
- Device Group Send full status item #14045
- Support for MAX7219 Dot Matrix displays #14091
- Experimental ADE7953 (Shelly EM) reset on restart #14261
- Solax X1 negative temperature support #14278
- Solax X1 modbus RTS support and offline status #14305
- Tasmota favicon to webbrowser tab #14322
- Support for BME688 with latest Bosch-Sensor-API library #14513
- Rule variable %color% #14572
- Rule variables %timer1% to %timer16% #14619
- Support for MQ analog sensor for air quality by Francesco Adriani #14581
- ESP32 single binary firmware #14239
- ESP32 disable serial console when 3 (ESP32) or 2 (Other models) serial interfaces are requested #14487
- ESP32 support for TuyaMcu
- ESP32 Berry features
- ESP32 support for USE_PWM_DIMMER as GPIO
Option E1
- ESP32 increase PWM channels to 16
- ESP32 auto-configuration
- ESP32 initial support for ESP32S3 with support for 38 configurable GPIOs
Breaking Changed
Changed
- ESP32 core library from v2.0.2 to v2.0.2.1
- PubSubClient library from v2.8.12 to v2.8.13
- TasmotaSerial library from v3.3.0 to v3.4.0
- TasmotaModbus library from v1.2.0 to v3.4.0
- ESP8266Audio library from v1.9.2 to v1.9.5
- ESP8266SAM library from v1.0 to v1.0.1
- BME68x-Sensor-API library from v3.5.9 to v4.4.7
- SR04 driver to support US-100
- Mitsubishi HVAC temperature resolution #13936
- Remove restriction of topic must differ from mqttclient #14019
- ESP32 Set stack size with
#define SET_ESP32_STACK_SIZE
, addedStackLowMark
metrics - ESP32 Berry stores compiled bytecode into IRAM, freeing space in heap #14307
Fixed
- Intermittent exceptions and heap corruption due to PubSubClient library buffer overflow #13700
- EZOO2 sensor message format #14000
- DHT support negative temperatures on different hardware #14173
- Hardware serial parity and stop bits support #14212
- Edit file for SD card #14229
- Scripter memory corruption #14268
- ESP32 Webcam exception during flashwrites
- ESP32 LedPwmMode exception #14073
- ESP32 Compile error when I2S_Audio is enabled #14095
- ESP32 Provide proper OTA_URL for tasmota32solo1 #14202
- ESP32 OneWire-Stickbreaker (DS18x20) library support for ESP32C3 and ESP32S2 #14338
Removed
- ESP32 consolidate odroidgo and core2 binaries into tasmota32-lvgl using Berry features
1、 tasmota-AF.bin 621.08KB
2、 tasmota-AF.bin.gz 442.92KB
3、 tasmota-BG.bin 626.39KB
4、 tasmota-BG.bin.gz 444.12KB
5、 tasmota-BR.bin 621.55KB
6、 tasmota-BR.bin.gz 443.03KB
7、 tasmota-CN.bin 620.33KB
8、 tasmota-CN.bin.gz 443.07KB
9、 tasmota-CZ.bin 621.34KB
10、 tasmota-CZ.bin.gz 443.17KB
11、 tasmota-DE.bin 621.34KB
12、 tasmota-DE.bin.gz 442.89KB
13、 tasmota-display.bin 602.69KB
14、 tasmota-display.bin.gz 418.37KB
15、 tasmota-ES.bin 621.45KB
16、 tasmota-ES.bin.gz 442.94KB
17、 tasmota-FR.bin 621.61KB
18、 tasmota-FR.bin.gz 442.98KB
19、 tasmota-FY.bin 620.98KB
20、 tasmota-FY.bin.gz 442.91KB
21、 tasmota-GR.bin 624.7KB
22、 tasmota-GR.bin.gz 443.94KB
23、 tasmota-HE.bin 622.33KB
24、 tasmota-HE.bin.gz 443.23KB
25、 tasmota-HU.bin 621.64KB
26、 tasmota-HU.bin.gz 443.22KB
27、 tasmota-ir.bin 623.67KB
28、 tasmota-ir.bin.gz 428.59KB
29、 tasmota-IT.bin 621.61KB
30、 tasmota-IT.bin.gz 442.87KB
31、 tasmota-knx.bin 616.92KB
32、 tasmota-knx.bin.gz 435.56KB
33、 tasmota-KO.bin 621.25KB
34、 tasmota-KO.bin.gz 443.16KB
35、 tasmota-lite.bin 503.34KB
36、 tasmota-lite.bin.gz 359.2KB
37、 tasmota-minimal.bin 395.89KB
38、 tasmota-minimal.bin.gz 282.35KB
39、 tasmota-NL.bin 621.08KB
40、 tasmota-NL.bin.gz 442.7KB
41、 tasmota-PL.bin 621.64KB
42、 tasmota-PL.bin.gz 443.23KB
43、 tasmota-PT.bin 621.83KB
44、 tasmota-PT.bin.gz 443.09KB
45、 tasmota-RO.bin 621.17KB
46、 tasmota-RO.bin.gz 442.81KB
47、 tasmota-RU.bin 624.98KB
48、 tasmota-RU.bin.gz 443.98KB
49、 tasmota-SE.bin 621.13KB
50、 tasmota-SE.bin.gz 442.87KB
51、 tasmota-sensors.bin 676.06KB
52、 tasmota-sensors.bin.gz 476.5KB
53、 tasmota-SK.bin 621.42KB
54、 tasmota-SK.bin.gz 443.18KB
55、 tasmota-TR.bin 621.36KB
56、 tasmota-TR.bin.gz 443.08KB
57、 tasmota-TW.bin 620.91KB
58、 tasmota-TW.bin.gz 443.41KB
59、 tasmota-UK.bin 625.81KB
60、 tasmota-UK.bin.gz 444.08KB
61、 tasmota-VN.bin 622.55KB
62、 tasmota-VN.bin.gz 443.29KB
63、 tasmota-zbbridge.bin 673.69KB
64、 tasmota-zbbridge.bin.gz 474.7KB
65、 tasmota-zigbee.bin 753.52KB
66、 tasmota-zigbee.bin.gz 530.54KB
67、 tasmota.bin 620.5KB
68、 tasmota.bin.gz 442.17KB
69、 tasmota32-AF.bin 1.31MB
70、 tasmota32-AF.factory.bin 1.37MB
71、 tasmota32-BG.bin 1.32MB
72、 tasmota32-BG.factory.bin 1.38MB
73、 tasmota32-bluetooth.bin 1.46MB
74、 tasmota32-bluetooth.factory.bin 1.52MB
75、 tasmota32-BR.bin 1.31MB
76、 tasmota32-BR.factory.bin 1.37MB
77、 tasmota32-CN.bin 1.31MB
78、 tasmota32-CN.factory.bin 1.37MB
79、 tasmota32-CZ.bin 1.31MB
80、 tasmota32-CZ.factory.bin 1.37MB
81、 tasmota32-DE.bin 1.31MB
82、 tasmota32-DE.factory.bin 1.37MB
83、 tasmota32-display.bin 1.16MB
84、 tasmota32-display.factory.bin 1.22MB
85、 tasmota32-ES.bin 1.31MB
86、 tasmota32-ES.factory.bin 1.37MB
87、 tasmota32-FR.bin 1.31MB
88、 tasmota32-FR.factory.bin 1.37MB
89、 tasmota32-FY.bin 1.31MB
90、 tasmota32-FY.factory.bin 1.37MB
91、 tasmota32-GR.bin 1.31MB
92、 tasmota32-GR.factory.bin 1.38MB
93、 tasmota32-HE.bin 1.31MB
94、 tasmota32-HE.factory.bin 1.37MB
95、 tasmota32-HU.bin 1.31MB
96、 tasmota32-HU.factory.bin 1.37MB
97、 tasmota32-ir.bin 1.15MB
98、 tasmota32-ir.factory.bin 1.21MB
99、 tasmota32-IT.bin 1.31MB
100、 tasmota32-IT.factory.bin 1.37MB
101、 tasmota32-KO.bin 1.31MB
102、 tasmota32-KO.factory.bin 1.37MB
103、 tasmota32-lvgl.bin 1.58MB
104、 tasmota32-lvgl.factory.bin 1.64MB
105、 tasmota32-NL.bin 1.31MB
106、 tasmota32-NL.factory.bin 1.37MB
107、 tasmota32-PL.bin 1.31MB
108、 tasmota32-PL.factory.bin 1.37MB
109、 tasmota32-PT.bin 1.31MB
110、 tasmota32-PT.factory.bin 1.37MB
111、 tasmota32-RO.bin 1.31MB
112、 tasmota32-RO.factory.bin 1.37MB
113、 tasmota32-RU.bin 1.31MB
114、 tasmota32-RU.factory.bin 1.38MB
115、 tasmota32-SE.bin 1.31MB
116、 tasmota32-SE.factory.bin 1.37MB
117、 tasmota32-SK.bin 1.31MB
118、 tasmota32-SK.factory.bin 1.37MB
119、 tasmota32-TR.bin 1.31MB
120、 tasmota32-TR.factory.bin 1.37MB
121、 tasmota32-TW.bin 1.31MB
122、 tasmota32-TW.factory.bin 1.37MB
123、 tasmota32-UK.bin 1.32MB
124、 tasmota32-UK.factory.bin 1.38MB
125、 tasmota32-VN.bin 1.31MB
126、 tasmota32-VN.factory.bin 1.37MB
127、 tasmota32-webcam.bin 1.15MB
128、 tasmota32-webcam.factory.bin 1.22MB
129、 tasmota32.bin 1.31MB
130、 tasmota32.factory.bin 1.37MB
131、 tasmota32c3.bin 1.34MB
132、 tasmota32c3.factory.bin 1.4MB
133、 tasmota32solo1.bin 1.3MB
134、 tasmota32solo1.factory.bin 1.36MB