RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

1. Migrate to Sonoff-Tasmota 3.9.x
2. Migrate to Sonoff-Tasmota 4.x
3. Migrate to Sonoff-Tasmota 5.14
4. Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
5. Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

6. Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

7. Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

• tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
• tasmota-AF.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
• tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
• tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
• tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
• tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
• tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
• tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
• tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

• https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
• http://ota.tasmota.com/tasmota/release

Historical binaries can be downloaded from

• http://ota.tasmota.com/tasmota/release-10.1.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.1.1.

• tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
• tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 and 4M+ flash.
• tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
• tasmota32-AF.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
• tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
• tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
• tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
• tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
• tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
• tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware for 8M+ flash.
• tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware for 8M+ flash.

Latest released binaries can be downloaded from

• https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware
• http://ota.tasmota.com/tasmota32/release

Historical binaries can be downloaded from

• http://ota.tasmota.com/tasmota32/release-10.1.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v10.1.0 Noelle

Added

• Support for 1 second heartbeat GPIO
• Support for FUNC_BUTTON_MULTI_PRESSED in (light)drivers
• Command TcpConfig for TCPBridge protocol configuration #13565
• Support for HDC2010 temperature/humidity sensor by Luc Boudreau #13633
• WS2812 scheme 13 stairs effect #13595
• Command IfxPeriod to overrule Teleperiod for Influx messages #13750
• Support for GPE Multi color smart light as sold by Action in the Netherlands
• Shutter support for venetian blinds with tilt control
• Support for 74xx595 8-bit shift registers #13921
• ESP32 Autoconfiguration
• ESP32 Preliminary support for Tasmota Apps (.tapp extesions)
• ESP32 OTA over HTTPS
• ESP32 HTTPS support to WebQuery
• ESP32 Berry support for neopixel (WS2812, SK6812)
• ESP32 Berry import re regex module
• ESP32 Berry add module python_compat to be closer to Python syntax #13428
• ESP32 Proof of Concept Sonoff SPM with limited functionality (switching and energy monitoring) #13447

Breaking Changed

• ESP32-S2 TSettings memory usage fixed to 4096 bytes regression from v9.5.0.8

Changed

• IRremoteESP8266 library from v2.7.20 to v2.8.0
• ESP32 core library from v1.0.7.4 to v2.0.1.1
• ESP32-C3 core library from v2.0.0-post to consolidated ESP32 core library
• ESP32 NimBLE to v.1.3.3
• ESP32 toolchains changed from 8.4.0-2021r1 to 8.4.0-2021r2
• Range conversion edge values
• ESP8266 Gratuitous ARP enabled and set to 60 seconds #13623
• File editor no-wrap #13427
• MQTT TLS dual mode (CA or fingeprint) in same firmware, SetOption132 1 to force fingerprint
• ESP32 Ethernet hostname ending in _eth to -eth according to RFC952

Fixed

• Initial reset RTC memory based variables like EnergyToday and EnergyTotal
• SML compile error #13441
• GUI checkbox MQTT TLS not saved regression from v9.2.0.3 #13442
• Discovery of shutters #13572
• Tuya dimmer range issue #13849
• ESP32 Telegram compile error #13435
• ESP32-C3 OneWire as used by DS18x20 #13583
• ESP32 analog NTC temperature calculation #13703
• ESP32 compile error BLE EQ3 driver with core 2.0.x #13948

Removed

• ILI9488 driver in favour of Universal Display driver #13719