RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

1. Migrate to Sonoff-Tasmota 3.9.x
2. Migrate to Sonoff-Tasmota 4.x
3. Migrate to Sonoff-Tasmota 5.14
4. Migrate to Sonoff-Tasmota 6.x
5. Migrate to Tasmota 7.x

--- Major change in parameter storage layout ---

6. Migrate to Tasmota 8.1
7. Migrate to Tasmota 8.x

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v8.1.0 Doris the Settings are re-allocated in such a way that fallback is only allowed and possible to release v7.2.0 Constance. Once at v7.2.0 you're on your own when downgrading even further.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.1 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Although it might still compile on previous Core versions all support will be removed in the near future.

Support of TLS

To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.1.

• tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
• tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
• tasmota-lite.bin = The Lite version without most drivers and sensors.
• tasmota-knx.bin = The Knx version without some features but adds KNX support.
• tasmota-sensors.bin = The Sensors version adds more useful sensors.
• tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
• tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
• tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

List of embedded modules.

Complete list of available feature and sensors.

Changelog

Version 8.3.0 Fred

• Breaking Change Device Groups multicast address and port (#8270)
• Change PWM implementation to Arduino #7231 removing support for Core versions before 2.6.3
• Change default PWM Frequency to 977 Hz from 880 Hz
• Change minimum PWM Frequency from 100 Hz to 40 Hz
• Change flash access removing support for any Core before 2.6.3
• Change HM-10 sensor type detection and add features (#7962)
• Change light scheme 2,3,4 cycle time speed from 24,48,72,... seconds to 4,6,12,24,36,48,... seconds (#8034)
• Change remove floating point libs from IRAM
• Change remove MQTT Info messages on restart for DeepSleep Wake (#8044)
• Change IRremoteESP8266 library updated to v2.7.6
• Change HAss discovery by Federico Leoni (#8370)
• Fix possible Relay toggle on (OTA) restart
• Fix PWM flickering during wifi connection (#8046)
• Fix Zigbee sending wrong Sat value with Hue emulation
• Fix Zigbee crash with Occupancy sensor (#8089)
• Add Zigbee command ZbRestore to restore device configuration dumped with ZbStatus 2
• Add Zigbee command ZbUnbind
• Add Zigbee command ZbBindState and manufattribute
• Add Zigbee command ZbConfig and configuration in Settings
• Add commands CounterDebounceLow and CounterDebounceHigh to control debouncing (#8021)
• Add commands NrfPage, NrfIgnore, NrfScan and NrfBeacon to NRF24 Bluetooth driver (#8075)
• Add commands GlobalTemp and GlobalHum to init sensor data (#8152)
• Add command SO as shortcut for command SetOption
• Add command SetOption41 <x> to force sending gratuitous ARP every seconds
• Add command SetOption73 1 for button decoupling and send multi-press and hold MQTT messages by Federico Leoni (#8235)
• Add command SetOption90 1 to disable non-json MQTT messages (#8044)
• Add command SetOption91 1 to enable fading at startup / power on
• Add command SetOption92 1 to set PWM Mode from regular PWM to ColorTemp control (Xiaomi Philips ...)
• Add command SetOption93 1 to control caching of compressed rules
• Add command Sensor10 0/1/2 to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
• Add command Sensor10 31..254 to control BH1750 measurement time which defaults to 69 (#8016)
• Add command Sensor18 0..32000 to control PMS5003 sensor interval to extend lifetime by Gene Ruebsamen (#8128)
• Add command DevGroupName to specify up to four Device Group Names (#8087)
• Add command DevGroupSend to send an update to a Device Group (#8093)
• Add command Ping (#7176)
• Add command Palette to add the ability to specify a palette of colors (#8150)
• Add support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa
• Add support for 64x48 SSD1306 OLED (#6740)
• Add support for Seven Segment display using HT16K33 (#8116)
• Add support for up to four MQTT GroupTopics (#8014)
• Add support for longer template names
• Add support for an iAQ sensor (#8107)
• Add support for AS3935 Lightning Sensor by device111 (#8130)
• Add console command history (#7483, #8015)
• Add quick wifi reconnect using saved AP parameters when SetOption56 0 (#3189)
• Add more accuracy to GPS NTP server (#8088)
• Add support for analog anemometer by Matteo Albinola (#8283)
• Add support for OpenTherm by Yuriy Sannikov (#8373)
• Add support for Thermostat control by arijav (#8212)
• Add experimental basic support for Tasmota on ESP32 based on work by Joerg Schueler-Maroldt
• Add automatic compression of Rules to achieve ~60% compression by Stefan Hadinger
• Add rule trigger at root level like on loadavg<50 do power 2 endon after state command