v14.4.1

版本发布时间: 2024-12-15 21:46:59

arendst/Tasmota最新发布版本:v14.4.1(2024-12-15 21:46:59)

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.8 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version v3.1.0.241206.

Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.0.241206 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.8.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota-4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-14.4.1

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version v3.1.0.241206.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32s2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash.
tasmota32s2cdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash.
tasmota32s3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash.
tasmota32c2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash.
tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with USB HWCDC and fallback to serial and 4M+ flash.
tasmota32c6.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash.
tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

https://ota.tasmota.com/tasmota32/release-14.4.1

The latter links can be used for OTA upgrades too like OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v14.4.1 Rudolph

Added

MCP23XXX_DRV control register IOCON in template #22622
ESP32 support for TLS ECDSA #22649

Changed

Display removed PWM control of backlight GPIO regression from v14.1.0
SSL clean up remnants of old fingerprint algorithm #22645
Berry make Leds animate calls reentrant #22643

Fixed

Display DisplayMode adds a display device while not configured
GUI display power button regression from v14.3.0.5 #15788
MCP23xxx, PCF8574 and Shift595 power control when a display is configured regression from v14.3.0.7
ESP32 rules operation priority regression from v13.3.0.4 #22636

Changelog v14.4.0 Rudolph

Added

Command WebColor20 to control color of Button when Off
Command SetOption161 1 to disable display of state text #22515
Command SetOption162 1 to disable adding export energy to energy today #22578
DALI support for short addresses (gear) and groups
DALI command DaliGear to set max found gear to speed up scan response
DALI command DaliGroup to add gear to groups
DALI command DaliTarget to set light control broadcast, group number or gear number
DALI command DaliGroupSliders 0..16 to show GUI group sliders with feedback disabling DaliLight
DALI inverted signal configuration using GPIO DALI RX_i/TX_i
Support for I2C over Serial #22444
Support KNX for scripts #22429
Support deep sleep (standby) for VL53L0X #22441
Support for Shelly DALI Dimmer Gen3
Support for HLK-LD2410S 24GHz smart wave motion sensor #22253
Support for US AQI and EPA AQI in PMS5003x sensors #22294
Support for MS5837 pressure and temperature sensor #22376
Support for TM1640 based IoTTimer by Stefan Oskamp #21376
Support for Sonoff POWCT Energy Export Active #22596
HLK-LD2410 Engineering mode #21880
Mitsubishi Electric HVAC Operation time for MiElHVAC #22334
Mitsubishi Electric HVAC Outdoor Temperature for MiElHVAC #22345
Mitsubishi Electric HVAC Compressor Frequency for MiElHVAC #22347
Mitsubishi Electric HVAC Auto Clear Remote Temp for MiElHVAC #22370
SolaxX1 Meter mode #22330
Show Active Power Total with any multi-phase energy monitoring #22579
ESP32 support for WPA2/3 Enterprise conditional in core v3.1.0.241206 #22600
ESP32 ULP lp_core to Berry ULP module (#22567)#22567
ESP32 new BLE filters by name and minimum RSSI #22530
ESP32 Hybrid compile take custom boards settings in account #22542
ESP32 MI32 legacy add config operations #22458
BLE track devices with RPA #22300
Berry add I2C read16/write16 supporting Little Endian #22448
Berry drivers for PCA9535 (generic and in SenseCAP D1) #22451
HASPmota haspmota.get_pages() to get the sorted list of pages #22358

Breaking Changed

ESP32 ArtNet switches from GRB to RGB encoding #22556

Changed

ESP32 Platform from 2024.09.30 to 2024.12.30, Framework (Arduino Core) from v3.1.0.240926 to v3.1.0.241206 and IDF to 5.3.2 #22600
ESP32 LVGL library from v9.2.0 to v9.2.2 #22385
ESP32 replaced NeoPixelBus with TasmotaLED #22556
Redesign GUI adding feedback to buttons, shutters and lights
Add GUI submenu headers and refresh configuration button text (#22592)
Use command WebButton1 to change GUI shutter 1 name
RG-15 sensor name from RG-15 to RG15 #22612
Unit (k)VAr(h) to (k)var(h) #22435
AHT1X/AHT2X/AHT3X ready for virtual I2C #22427
SGP4X ready for virtual I2C #22427
SCD40 reduce logging levels #22443
SCD40 ready for virtual I2C #22443
Refactored i2c_enabled as array #22387
DALI renamed commands DaliCommission to DaliScan and DaliWeb to DaliLight
DALI set Tasmota light control as default
Shutter optimized behavior to publish shutter data with sensor request #22353
Prevent active BLE operations with unencrypted MI-format beacons #22453
ESP32 max number of supported switches/buttons/relays from 28 to 32
ESP32 max number of interlocks from 14 to 16
HASPmota support for page delete and object updates #22311

Fixed

FUNC_COMMAND linked list command buffer corruption by shutter driver
Shift595 output offsets and restart relay toggles
Use HTML escape on File System Edit File load #22492
Prevent crashing when display.ini is missing end # #22471
KNX Scenes index change regression from v14.2.0.4 #22405
Magic switch applying masking window to any power change #22535
Shutter wrong power ON state #22548
Alexa Hue with multiple devices #22383
Mitsubishi Electric HVAC Standby Stage for MiElHVAC #22430
EQ3 TRV firmware version 1.46 fails if the default true is used in subscribe on the notify characteristic #22328
Ethernet on -DFRAMEWORK_ARDUINO_ITEAD framework regression from v14.3.0 #22367
ESP8266 Device Group exception due to lack of stack space (#22271)#22271
ESP32 Upgrade by file upload response based on file size #22500
ESP32 Arduino Core IPv6 zones used by Matter #22378
ESP32, ESP32-S2 and ESP32-S3 re-enable touch buttons #22446
ESP32-S3 UART output mode for Tx #22426
Matter provisioning with matter.js controller #22470