v14.2.0

版本发布时间: 2024-08-14 20:52:35

arendst/Tasmota最新发布版本:v14.2.0(2024-08-14 20:52:35)

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.7 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version 3.0.4.

Support of ESP8266 Core versions before 2.7.7 and ESP32 Core versions before 3.0.4 have been removed.

Known issues with v14.2.0

Due to the change from ESP32 Arduino Core2/IDF4 to Arduino Core3/IDF5 not all functionality has been restored. The following features are known not to work on ESP32:

Wifi Range Extender #21200

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.7.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota-4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-14.2.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version 3.0.4.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32s2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash.
tasmota32s2cdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash.
tasmota32s3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash.
tasmota32c2.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash.
tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with USB HWCDC and fallback to serial and 4M+ flash.
tasmota32c6.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash.
tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

https://ota.tasmota.com/tasmota32/release-14.2.0

The latter links can be used for OTA upgrades too like OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v14.2.0 Rita

Added

Command AdcGpio<gpio> <parameters> to better support ADC configuration
Support for QMP6988 temperature and pressure sensor
Support for Sonoff WTS01 temperature sensor using SerialBridge in SSerialMode 3
Support for Sonoff iFan04-H using template #16402
Support for Sonoff POWCT Ring #21131
Support for Wooliis Hall Effect Coulometer or Battery capacity monitor #21732
Analog GPIO ADC Input with AdcGpio<pin> <start_range>,<end_range>,<margin>,1 provide direct light control
Analog GPIO ADC Voltage with AdcGpio<pin> <start_range>,<end_range>,<lowest_voltage>,<highest_voltage> provide energy monitoring with dc voltage
Analog GPIO ADC Current with AdcGpio<pin> <start_range>,<end_range>,<lowest_current>,<highest_current> provide energy monitoring with dc voltage
Rule and Scripter xdrv sensor polling
Skip MQTT response if command is prefixed with underscore #21740
Skip MQTT response if commands are executed prefixed with Backlog2 (no delay) or Backlog3 #21740
Extend command SetOption147 1 to disable publish of IRReceived MQTT messages #21574
NeoPool command NPSetOption<x> to enabled/disable data validation/connection statistics #21850
NeoPool data validation and communication statistics default enabled for ESP32 only #21721
ESP32 support for power and energy limit checks, like MaxEnergy2 per phase #21695
Berry solidification of bytes instances #21558
Berry automatic rounding of float to int when calling C mapped functions #21601
Berry math.round #21602
Berry classof extended to class methods #21615
Berry tasmota.rtc("config_time") #21698
Berry math.min() and math.max() #21705
Berry FUNC_ANY_KEY event calling any_key() #21708
Berry FUNC_BUTTON_MULTI_PRESSED event and make FUNC_BUTTON_PRESSED called only on state changes and once per second #21711
Berry int64 added low32() and high32() methods, used in Matter #21728
Berry webserver_async #21836
Berry cam module and img class #21743
Berry new type "addr" to ctypes mapping #21883
Berry file.savecode() #21884
Berry solidify.nocompact() and reduce size of Matter UI #21885
Berry zigbee.find() #21889
Berry zigbee.started() #21895
HASPmota rounds to nearest int values passed as 'real' #21599
Matter support for Air Quality sensors #21559
Matter support for bridged Air Quality #21597
Matter internal debug option #21634
Matter Fan support (virtual only) #21637
Matter show event name in logs #21649
Matter full support of events #21698
Matter support for 'Generic Switch' based on Tasmota Buttons #21731
Matter improve internal inspectfor superclasses #21824
Matter support for split lights (SetOption68 1 and SetOption37 128) #21834

Breaking Changed

Berry energy module support for 8 phases and move to pseudo-arrays #21887

Changed

ESP8266 platform update from 2024.01.01 to 2024.06.00 #21668
ESP8266 Framework (Arduino Core) from v2.7.6 to v2.7.7 #21668
ESP32 platform update from 2024.05.13 to 2024.08.10 #21893
ESP32 Framework (Arduino Core) from v3.0.0 to v3.0.4 #21893
Rule and Scripter sensor polling
Refactored Analog driver to better support multiple channels
GUI name of Analog to ADC
Optional MQTT_TELE_RETAIN to Energy Margins message replaced by SensorRetain
Display timing splash screen with display modes 1 to 5
Allow receive or send using SerialBridge
SerialBridge command SSerialSend9 replaced by SSerialMode
SML replace vars in descriptor and line #21622
NeoPool using temperature as only frequently changing value for NPTeleperiod #21628
NeoPool make compiler setting available by user_config_override.h #21645
ESP32 support for energy margin checks, like MaxPower2 per phase #21695
ESP32 MI32 refactoring, bugfixes, generic device scanning #21603
ESP32 MI32 improve parser #21648
ESP32 TM1621 number overflow from "9999" to "12E3" #21131
Zigbee loads device data early before MCU startup #21917
Berry updated precompiled Windows binary #21858
Berry simplified module persist #21812
Berry consolidated constants for solidified classes reduces Flash size #2185
Matter refactoring of bridged devices #21575
Matter filter suffix automatically added for sensors #21589
Matter support for Rain sensor #21633
Matter refactor reading of multiple attributes to reduce memory pressure #21675
Matter improve encoding of attributes to reduce flash size #21864

Fixed

On universal display remove default backlight power if a single PWM channel is used for backlight. Regression from 14.0.0.1 #21726
Shutter MQTT on inverted shutter #21663
Scripter TCP server #21660
Filesystem SD MMC free space display #21869
ESP32 allow use of UART0 with enabled USB_CDC_CONSOLE #21496
ESP32 I2S fixes #21770
ESP32 Resistive Touch xpt for 2 spi busses #21814
Berry input() returns empty string and does not crash #21565
Berry bytes.resize() for large sizes #21716
Berry light.get for separate RGB/CT #21818
Berry bytes setters and getters with negative offsets #21835
Berry file.write() raises an exception on failure (ex: disk full) #21849
Matter interverted attributes 0xFFF9 and 0xFFFB #21636
Matter CASE Sigma1 resumption mode for faster reconnection #21644
Matter TLV.U8 unsigned encoding #21672
Matter resumption final ack #21673