12.4

版本发布时间: 2024-06-18 21:02:22

home-assistant/operating-system最新发布版本:12.4(2024-06-18 21:02:22)

Home Assistant Operating System

Bump Docker to v26.1.4 (#3411) @sairon
Update Buildroot to 2024.02.3 (#3406) @sairon

Build System

Use Genimage for declarative image layout (#3388) @sairon
Bump docker/build-push-action from 5.3.0 to 5.4.0 (#3405) @dependabot
Bump docker/login-action from 3.1.0 to 3.2.0 (#3399) @dependabot

Raspberry Pi

:information_source: Some Raspberry Pi users have reported system lockups and reboots with some Z-Wave and Zigbee USB adapters. This is an unresolved bug of the dwc_otg driver in the Raspberry Pi kernel. If your systems reboots or locks up during Z-Wave or Zigbee initialization, you can use the DWC2 driver by adding dtoverlay=dwc2 to config.txt. See #3362 for details. Only do these adjustments if your device locks up and reboots with HAOS 12.3 or newer with USB devices connected.

Set tty0 in cmdline as the default preferred console (#3402) @sairon
RaspberryPi: Update kernel to 6.6.31 - stable_20240529 (#3400) @sairon

Home Assistant Yellow

Set tty0 in cmdline as the default preferred console (#3402) @sairon
RaspberryPi: Update kernel to 6.6.31 - stable_20240529 (#3400) @sairon
Linux: Update kernel to 6.6.32 (#3394) @sairon

Home Assistant Green

Linux: Update kernel to 6.6.33 (#3415) @sairon
Fix writing to eMMC in U-Boot on Green (#3412) @sairon
Set tty0 in cmdline as the default preferred console (#3402) @sairon
Use U-Boot tarball for all boards (#3361) @sairon

Open Virtual Appliance

Linux: Update kernel to 6.6.33 (#3415) @sairon
Set tty0 in cmdline as the default preferred console (#3402) @sairon
Bump buildroot to update openvmtools to 12.3.0 (again) (#3370) @sairon

Generic x86-64

:warning: Fujitsu Esprimo Q920 fails to boot with GRUB bootloader distributed in this OS release, updating to 12.4.rc1 may cause a boot failure and manual intervention might be needed, see #3348 for details.

Linux: Update kernel to 6.6.33 (#3415) @sairon
Set tty0 in cmdline as the default preferred console (#3402) @sairon

Hardkernel ODROID

:information_source: For ODROID-N2 (and Home Assistant Blue) this release reverts U-Boot update which is believed to be the cause of some intermittent issues when booting from eMMC. If you had any trouble previously after an update to OS 11.5 or newer, please see #3227 and help us with tracing this issue. :warning: Please note that some new eMMC modules with the Kingston chips are not supported yet - this is tracked in #3250.