v13.1.0

版本发布时间: 2023-08-15 16:15:43

arendst/Tasmota最新发布版本:v14.2.0(2024-08-14 20:52:35)

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version.

Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial. If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version.

Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14 (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz)
Upgrade to latest release (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

This release will be supported from ESP32/Arduino library Core version 2.0.11.

Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.11 have been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota-4M.bin = The Tasmota version with most drivers and filesystem for 4M+ flash.
tasmota-AD.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-13.1.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based

The following binary downloads have been compiled with ESP32/Arduino library core version 2.0.11.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32xy.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash.
tasmota32xycdc.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash.
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32-AD.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
tasmota32-nspanel.bin = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-zbbridgepro.bin - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

https://ota.tasmota.com/tasmota32/release-13.1.0

The latter links can be used for OTA upgrades too like OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v13.1.0 Quentin

Added

Command BrRestart to restart the Berry VM (experimental) #19003
Command Delay -1 to wait until next second #18984
Command Restart 9 to save all changes and go into deepsleep waiting for a reset #19024
Support for MAX17043 fuel-gauge systems Lipo batteries #18788
Support for multiple PCA9685 with extended functionality #18805
Support for SGP41 TVOC/NOx Sensor #18880
Support for DeepSleep battery level percentage #19134
Zigbee decode Aqara 0000/FF01 attribute 03 as Temperature #19210
ESP32 prepare for Arduino Core v3 and esp-idf v5 #19264
Berry getgbl performance counter to debug.counters() #19070
Berry _class can be used in static var initialization code #19088
Berry energy.update_total() to call EnergyUpdateTotal() from energy driver #19117
Berry tasmota.loglevel() and tasmota.rtc_utc() for faster performance #19152
Berry metrics for memory allocation/deallocation/reallocation #19150
Berry AES CCM decrypting in a single call to avoid any object allocation #19153
Berry bytes get and set work for 3 bytes values #19225
Partition Wizard is now able to convert to safeboot from Shelly partition layout #19034
Matter option to disable bridge mode #18992
Matter mini-profiler #19075
Matter support for fabric_filtered request (for Google compatibility) #19249

Breaking Changed

Berry bool( [] ) and bool( {} ) now evaluate as false #18986
Berry import strict now detects useless expression without side effects #18997

Changed

IRremoteESP8266 library from v2.8.5 to v2.8.6
ESP32 Framework (Arduino Core) from v2.0.10 to v2.0.11
ESP32 LVGL library from v8.3.7 to v8.3.8 (no functional change)
Initial DisplayMode from 1 to 0 and DisplayDimmmer from 10% to 50% #19138
Configuration backup and restore now supports .xdrvsetXXX files too #18295
Reduced log level for TeleInfo #19216
Console height from default 318 pixels to viewport #19241
Shutter button hold behaviour with grouptopic #19263
Thermostat improvements #19279
PID controller improvements #19285
HDC1080 detect device offline #19298
ADE7953 lowered no load threshold #19302
ESP32 shutter driver support up to 16 shutters #18295
ESP32 autodetect flashsize and adjust filesystem #19215
Berry extend range(lower, upper, incr) to arbitrary increment #19120
Berry updated syntax highlighting plugin for VSCode #19123
Berry mqtt.publish now distinguishes between string and bytes #19196
Matter support for temperature in Fahrenheit (SetOption8 1) #18987
Matter improve responsiveness #19002
Matter improve latency for remote commands #19072
Matter improve latency for single attribute reads and single commands #19158
Matter increased polling frequency for local switches/occupancy #19242

Fixed

Berry Walrus Operator #18982
MiElHVAC power commands regression from v12.4.0.1 #18923
Zero cross dimmer minimum interrupt time #19211
Fade would fail when the difference between start and target would be too small #19248
Inverted shutter #19243
ESP8266 SPI initialization for scripter, filesystem and MFRC522 #19209
Matter support for large atribute responses #19252
Matter auto-configuration Relay indices #19255